The Speedybee TX800 is a small, yet powerful VTX. Capable of 800mW output all while fitting in a 20x20mm mounting pattern. The integrated heatsink keeps dangerous heat away from sensitive electronics. Enhance your Cinematic FPV drone with the Speedybee TX800 video transmitter. Perfect for cinematic Freestyle drones and high-performance FPV setups, this transmitter delivers reliable video transmission for an immersive aerial experience. Upgrade your drone’s capabilities with the Speedybee TX800 video transmitter today!
FEATURES:
- IRC Tramp Protocol Support: Speedybee video transmitter TX800 supports the IRC TRAMP protocol and the modification of video transmission parameters through the remote control, including frequency, working power, and so on. If your flight controller supports Bluetooth or WiFi, You can also modify the video transmission parameters through the SpeedyBee App.
- Pit Mode: When you are flying with other pilots in the same place, Pit Mode helps you to power the drone more calmly without disturbing others.
- Integrated Heatsink: Protects against overheating, ensuring reliable performance.
- Compact Design: Fits into a 20x20mm mounting pattern, perfect for freestyle and cinematic FPV builds.
Manual:
VTX Table to enter in CLI (FCC)
# vtxtablevtxtable bands 5vtxtable channels 8vtxtable band 1 BOSCAM_A A CUSTOM 5865 5845 5825 5805 5785 5765 5745 5725vtxtable band 2 BOSCAM_B B CUSTOM 5733 5752 5771 5790 5809 5828 5847 5866vtxtable band 3 BOSCAM_E E CUSTOM 5705 5685 5665 0 5885 5905 0 0vtxtable band 4 FATSHARK F CUSTOM 5740 5760 5780 5800 5820 5840 5860 5880vtxtable band 5 RACEBAND R CUSTOM 5658 5695 5732 5769 5806 5843 5880 5917vtxtable powerlevels 5vtxtable powervalues 25 200 400 600 600vtxtable powerlabels 25 200 400 800 800save
SPECIFICATIONS:
- Frequency Channel: 5.8GHz 48CH
- Output Power: PIT/25mW/200mW/400mW/800mW
- Working Current: 5V@250~750mA
- Voltage out: 5V@max 250mA
- Voltage in: 3.7-5.5V
- Video input impedance: 75 Ohm
- Antenna Connector: MMCX
- Weight 5.6g: (without antenna)
- PCB Size: 28mm*28mm@20*20 M2
For BetaFlight flight controller firmware above BetaFlight 4.1.0, you need to upload a VTX Table to the flight controller before using the remote control to modify the video transmitter parameters normally. You can download VTX table for the Speedybee TX800 Video transmitter from the below links.
download SpeedyBee-TX800(USA).json
download SpeedyBee-TX800(EU).json
For the use of the video transmitter table, please refer to this article “How to Setup Betaflight VTX Table – SmartAudio Tramp VTX Control” by Oscar Liang.
PACKAGE INCLUDES:
- 1x Speedybee TX800 Video transmitter
- 1x MMCX Antenna
- 1x MMCX to SMA Cable
- 1x 1.0mm 4pin Cable
Reviews
There are no reviews yet.