KD7 is a 7″ X4 and X8 cinelifter (both options from the same frame kit) designed to carry a BM 4KG2, Red Komodo, Sony FX6, Freefly Ember etc. It has a unique I-beam design made of vertical arms clamped between two continuous plates. This creates an insanely strong and stiff structure, while packing a huge number of features into an only 263g frame.
KD7 has KDCM Lite mounting holes in three positions, KDCM/DAC camera mount holes in the middle, and naked BM mounting holes on top. You can go down to 0 degrees with no props in view on a 7.5mm lens on the 4KG2. The battery can be top or bottom mounted for great CG balance and lower moment of inertia and a more compact rig. For bottom mounting you can buy a KD Battery Plate to protect the battery and act as landing gear. There is lots of space inside, with an abundance of mounting holes, zip tie slots, and easy access to USB ports.
SPECIFICATIONS:
Weight: 263g (+ 35g if you use the battery plate)
Size: 244 x 309 x 25 mm
Mounting:
– KDCM Lite/KDCM/DAC camera mounting (30.5 x 30.5 M3 and 61 x 50.8 mm M4 holes with press nuts)
– Naked BM M3 mounting holes (90 x 124 mm)
– 3x 30.5 x 30.5 positions (can use 2 at once), 20 x 20, 25.5 x 25.5 VTX mounting
– Capacitor and VTX zip tie slots
– 16 x 16 and 19 x 19 Motor pattern
PACKAGE INCLUDES:
– T700 Carbon: 1x top plate, 1x bottom plate, 4x arms
– Hardware
– Motor screws and washers
– 2x FC/ESC screws and nuts
– 3D Prints
– Mounted XT60
– Mounted XT90
– XT30 female (for camera power)
– 2x 250mm battery straps
– Battery pad
– STLs and a Betaflight 4.5 tune can be downloaded for free from the KD7 GrabCAD page. The tune is used at your own risk and will not be suitable for all builds.
Recommended Parts (not included):
– KDCM or DAC camera mount
– KD Battery Plate if you want to bottom mount your battery or make the X8 version
– Matek 12S Pro BEC for camera power
– 2808 1350kv Xnova motors, 2807 1400kv AOS Supernova motors
– HQ 7x4x3 props
– Hobbywing 60/65A or Foxeer Reaper 65A ESC and any X8 FC with a good gyro
– 6s 2000-6000 mAh Lipo
– Any VTx you like will fit, and there are SMA mounts on the side for antennas (for ufl to SMA extensions use 10-15cm)
– DJI O4 Pro camera and VTx
Reviews
There are no reviews yet.