ImpulseRC ApexLR EVO 7 Inch FPV Frame Kit

TENSION BRACES

• As prop size increases, the longer arms required cause vibration issues which negatively impact flight performance and video stability. The ApexLR EVO uses a unique tension brace design between the arms to increase stiffness and shift the resonant frequency of the assembly.
• Pre-loading the arms in this way allows us to keep vibration to a manageable level while still using 5.5mm thick arms for a 7″ prop. The new approach saves 20g in carbon weight alone compared to equivalent 8mm thick arms.
• The ApexLR EVO is a variation on the typical ‘dead cat’ frame which have been modified to keep the front and rear motors aligned, allowing them to maintain the much loved compressed-x geometry in the motor layout.
• This ensures the frame remains balanced and flight characteristics are not compromised, unlike the classic ‘dead cat’ design which moves the rear motors closer to the body and severely impacts handling.

CAMERA MOUNT

• Included with the ApexLR EVO is a newly redesigned aluminium camera mount and 3D printed insulation inserts. This keeps the camera firmly locked in place and reduces vibrations, whilst ensuring it is electrically isolated from the frame.

• With the many different HD and analog cameras on the market there is a large variation between models in the distance from the front of the lens to the mounting bolts. To give the camera the best possible protection, whilst also keeping the frame out of shot, it is critical to be able to adjust the position of the camera forwards and backwards within the frame.
• By rotating the TPU inserts 180 degrees, as well as alternating between using the upper or lower bolt as the pivot point, the EVO camera mount has 4 possible mounting positions each 2mm apart.

SPECIFICATIONS:

PACKAGE INCLUDES: